This nautical bathroom remodel has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #MegaPrepped #CollectiveBias
Live and learn.
As you can see from the gorgeous grey tile, I won that battle.
And he loves it.
Please note: If your wifey brings this doorless shower idea to you, you should know, we do have a shower curtain to contain the spray. The shower is one of those ‘have your cake and eat it too situations’ because it makes you feel like the master bathroom is bigger when the curtain is open, and keeps the water in the shower when it’s being used. I’m a genius.
DIY Nautical Themed Shelf:
- Bookends
- 22” 2×8
- Miter saw
- Wood filler
- Nailgun
- Casing (We used 2 1/4.)
- Construction adhesive
- Hooks
- Paint (We chose to use the same semi-gloss as the trim so everything looked the same.)
- (Optional for the accents.) Silver paint
- (Optional tool used to remove the anchor.) Screwdriver
- Remove the screws holding the anchor in place and paint it with your accent color.
- Using a miter saw, cut the casing upright at a 45 degree angle.
- After all of the casing is cut, apply a thin layer of construction adhesive behind each piece before tacking it in. Starting with the middle piece first.
- Fill the nail holes and any gaps with a wood filler, and apply a coat of paint to both sides
- When the paint is dry, reattach the anchors to the bookends, flip the shelf upside down, and attach the bookends to the shelf with construction adhesive.
- Then, install a hook to the outside corner of each bookend.
Pin this Nautical Themed Shelf Tutorial!
And then decided it wouldn’t work.
And then agreed to do it because I told him I had to for this project, but said he planned on taking it down right after I took my pictures.
And never took it down because he… gasp… likes it.
Upcycled Bathroom Mirror Tutorial:
- Old bathroom mirror
- Casing (We used 2 1/4.)
- Melamine board
- Heavy duty mirror adhesive
- Heavy duty mirror hooks
- Nailgun
- Miter saw
- Wall anchors
- White paint (We used the same white semi-gloss mentioned above.)
- Using the miter saw, cut the casing flat at a 45 degree angle.
- Cut piece a piece of melamine to the size of the mirror plus 2 ¼ on every side (to account for the casing).
- Center the mirror on the melamine and trace the outline.
- Flip mirror over and apply a generous amount of construction adhesive to the back, avoiding about 2 inches from the edge of the mirror to make sure the glue does not squeeze out.
- Flip mirror back over and use the outline to center the mirror on the board.
- Using construction adhesive, attach the casing to the exposed melamine board, and tack the corners together with the nail gun.
- Using a wood filler, fill in the nail holes and any gaps where the corners of the trim meet.
- Tape off the edges of the mirror and paint the casing.
- Per the instructions for your adhesive, all the mirror to cure before moving it. (Ours was 48 hours.)
- Once cured, flip mirror over and attach the heavy duty hooks on the back of the mirror behind the vertical casing. (I went down about 4 inches on each side.)
Pin this Upcycled Bathroom Mirror Tutorial!
I like to think of it as keeping our home fully stocked and organized so we’re always ready for guests. Yanno, because a mega roll means a 4X bigger roll. And a 4X bigger roll means the roll won’t be empty when you sit down to go. Just doing my dooty as household manager…
Since the best bathroom experiences are the ones you don’t remember, do you have a system in place to prevent empties?
I absolutely love everything about this. Now I want to redo my bathroom…today!